Production Mode; Production Mode - Voltech ATi User Manual

G S
ETTING TARTED
2.5 P
RODUCTION
This is the normal operating mode of the ATi when used for production testing
of transformers.
Before you try to use the tester in production mode, make sure that all of the
following have been carried out:
1. Test programs have been created for the transformers that you wish to
test.
2. Either the programs are archived in the Server, which is connected to the
tester and running, and the tester has been set up to use the Server as
the Program Store,
or the programs have been downloaded into the tester, which has been
set up to use its internal memory as the Program Store.
3. Fixtures have been created for the transformers you wish to test.
Note:
If you have a footswitch fitted to the remote port on the tester, pressing it will
take the same action in production mode as pressing the upper softkey.
For text entry (such as the name of a program or the serial number of the
transformer under test), you may optionally use a barcode reader connected to
the tester's rear panel barcode port.
P 2-52
AGE
M
ODE
V AT U
OLTECH I SER
M
ANUAL