Voltech ATi User Manual page 89

G S
ETTING TARTED
FIXTURE1 is the name given as the 'Fixture ID' in the Editor software
'Program options' dialogue (see chapter 3) or under program options in front-
panel program mode (see chapter 6).
Press 'Compensate' or 'No Comp' as required.
Note: For fixture compensation, see later in this chapter.
Place the component to be tested in the fixture and press the 'Run' softkey,
touch one of the run-pads, or press the footswitch.
V AT U M P 2-55
OLTECH I SER ANUAL AGE