Additional Notes For The Above Example - Voltech ATi User Manual

AT S S
ERIES ERVER
When you have finished typing the code, return to the 'Sheet 1' of the
spreadsheet.
To run the code, again from the Excel top-level menu bar, select:
Tools > Macro
At the dialog box, select the name of the macro 'OLE_Demo', and click on the
RUN button.
The code will now start to run, and after a few seconds, you will see the first
message box defined in the code:
Click on the OK button. When you have pressed the RUN softkey and the first
result has been read, the message box will disappear, and you will then see
the first result entered into cell F3 of the spreadsheet.
Continue pressing the RUN softkey until the second message box is seen.
Click on the OK button to finish running the code.
4.3.8 A N A E
DDITIONAL OTES FOR THE BOVE XAMPLE
If there appear to be any problems while the code is running, press the escape
key. This will halt the execution, and bring up a dialog box to allow you to
either exit from the code execution, or to debug your code, for example by
single-stepping through it.
V AT U M P 4-43
OLTECH I SER ANUAL AGE