Voltech ATi User Manual page 163

At this point, you may want to protect your test program by setting an AT
password. To do this, select:
Tester > Set Password
The resulting dialogue (see
below) allows the AT password
to be set. If a password is set,
this password will need to be
entered into the AT whenever a
test program is changed or
deleted.
V AT U
OLTECH I SER
M
ANUAL
P E
ROGRAM DITOR
Note that this Editor
dialogue also allows
the password to be
reset. The old
password is not
required to do this. All
that is required is for
the new password to
be entered and
verified.
P 3-41
AGE