File Management Menu; Offline Mode - GE F650 User Manual

3.1 ENERVISTA 650 SETUP SOFTWARE

3.1.4 File management menu

File management with EnerVista 650 Setup software:

3.1.4.1 Offline mode

NO
Store in the computer the Logic configuration files (*.pep, *.aut, *.lib) as
1. "Relay and logic configuration" and "Protection and Control Settings" must be uploaded to the F650 relay or the device
to operate properly
3-6
Run EnerVista 650 Setup
Open a *.650 file
("File>Open" menu)
Modify Settings and relay
configuration
Is it necessary to
program
additional logic?
NO
Is the relay
completely
configured?
YES
Save *.650 settings & configuration file
well as the *.650 for further logic changes.
Figure 3-3: Offline mode file management
F650 DIGITAL BAY CONTROLLER
CHAPTER 3: INTERFACES, SETTINGS & ACTUAL VALUES
YES
Launch the Logic Configuration tool in EnerVista
650 Setup ("Setpoint>Logic Configuration")
Create new or modify the existing logic:
("File>Open Project")
Compile and save logic file (*.pep) and drawing
design (*.aut) in Logic Configuration tool
Exit PLC Graphic Editor and save the *.650 file
from the main application menu
1
GEK-113000-AF