Tcp/Udp Port Mappings - Viavi Xgig User Manual

TCP/UDP Port Mappings

Figure 187: Xgig TraceView Options Dialog Box, Search Tab
TCP/UDP Port Mappings
You can change the default TCP/UDP port mapping in TraceView and Expert by adding a file
UserTCPUDPServices.txt
the same as in
easiest method for creating entries is to copy lines from
UserTCPUDPServices.txt,
Expert loads both files every time they are launched.
For example, assume you want to display port 3260 as HTTP rather than as iSCSI. The default
TCPUDPServices.txt
# 3260
Copy the line into
mapping to HTTP:
3260
TraceView will now display the decode of port 3260 as HTTP.
Port mappings should only be changed by adding entries to the
Xgig Analyzer User's Guide
file in the installation folder of the Xgig Analyzer. The file format is
TCPUDPServices.txt
remove the beginning #, and then modify them. TraceView and
file defines the TCP port 3260 as iSCSI:
tcp iSCSI iSCSI
UserTCPUDPServices.txt,
tcp HTTP HTTP
Chapter 19, Xgig TraceView Tools
, which is also found in the Xgig Analyzer folder. The
TCPUDPServices.txt
remove the beginning #, and change the
UserTCPUDPServices.txt
, paste them in
file.
413