Triggering On Time-Out Or Within A Window Of Time - Viavi Xgig User Manual

Capture and Trigger Setup

Triggering on Time-out or Within a Window of Time

The
Timeout
something on the link is taking too long. Triggering within a window of time allows the user to
capture if the trigger event occurs within some time interval after the arm condition. See
"Time-out Value" on page 119
Trigger on Time-out Example
In this example, the analyzer will detect an SAS SOAF frame and wait for an Open Reject or an
Open Accept. If neither response occurs within 20 sec, the analyzer will trigger, fill up the buffer
and stop. If an Open Reject or an Open Accept does occur before the timeout, the analyzer will
reset and start looking for the next SAS SOAF frame.
Figure 58: Trigger on Time-out Example
Xgig Analyzer User's Guide
template in the
Available Templates Browser
for information on time-out options.
Chapter 4, Xgig TraceControl Capture Configuration
allows you to capture a trace when
131