Summary Fields And Field Groups - Viavi Xgig User Manual

Working With Columns
Table 26: Right Mouse Options for Column Values (continued)
Go to This Exchange in
Exchanges View
Go to This PDU in
Exchanges View
Show Frames For This
Exchange
Graphical Display of OOB
& SN
Show in Graphical
Transmitter Training
Synchronize Grids
Show Frame Word Offset When this context menu option is selected, a three-digit decimal word offset is

Summary Fields and Field Groups

Xgig TraceView has a set of pre-defined summary fields called Field Groups that are very useful
in viewing the decode information. The Field Groups contain a set of decode information that
would commonly be useful to look at when analyzing packets or frames. Different sets have been
created so you can easily select a pre-defined set of summary decode information.
Field Groups are added just like any other column to the display. Right-click a column header then
select
Insert Column
Field Groups
You can create your own set of decode information by adding information to one of the Field
Groups or one of the other columns in the display.
Summary Field Group
The
Summary
viewing. It shows the pertinent decode information for the highest-level protocol seen within the
packet or frame. The
of the columns for any protocol. The
deleted just like any other column.
Example displays of the
Xgig Analyzer User's Guide
This context menu is enabled for SAS/SATA, FC, PCIe, and NVMe frames in
the event grid that are part of an exchange. When clicking this menu, the
corresponding exchange is selected in the Exchanges View. If the capture
contains multiple links and an exchange can be found over multiple links, this
menu will highlight the exchange on the first link, not necessarily the link
correspond to this specific frame.
This context menu is enabled for iSCSI PDUs events. When clicking this
menu, the corresponding PDU is selected in the Exchanges View.
This context menu displays all frames for the exchange.
This context menu brings up the graphical OOB display for 6G SAS/SATA
events.
This context menu brings up the Graphical Transmitter Training display for
16G FC events.
This context menu synchronizes the event grid and Dword view or LaneView
with Exchanges View.
shown at the beginning of each Dword view or LaneView line belonging to a
frame.
or
Add To This Column...
item to see all pre-defined Field Groups.
column is a special Field Group that changes based on the protocol you are
column is a 'default' set of decode information that appears as one
Summary
Summary
Summary field in the decode for various protocols are shown below:
Chapter 13, Configuring Xgig TraceView
option. From the associated window, expand the
column can be added to, moved, expanded, or
299