Viavi Xgig User Manual page 260

Chapter 13, Configuring Xgig TraceView
Note that this method does not search the inspector text as a whole. For example, if you search for
"SCSI Cmd = Read(10)", it won't find this value; use the
search. However, the
Cmd".
It is not possible to use the
chassis. For traces within buffers, the
Advanced Quick Find
You can use advanced Quick Find to set up more elaborate search operations. You can change the
type of field, the logical operator, or the value of the field.
For columns containing numerical data, the
operators equal to (=), not equal to (!=), (&) and, less than (<), greater than (>), Match if the value
is anyone in the comma-separated list (in), Do not match if the value is anyone in the
comma-separated list (! in), Match if the value is within the dash-separated range X-Y specified
(where X and Y are included in the comparison) (range), and Do not match if the value is within
the dash-separated range X-Y specified (!range). For non-numeric data, only the equal to and not
equal to operators are available.
You can also use the
button to add another condition means that EITHER condition will be searched for. To add
Or>>
another condition using
Use the pull-down menus to set up the second Quick Find. Quick find supports up to eight And/Or
conditions.
Search for SAS 8-Byte World Wide Names
If you double-click in the
frame, the
the equivalent 3-byte hashed address. For example, if an SOAF Open Address frame has a SAS
Src Addr of 0x5000536572766572, then the
Figure 108: SAS Address Search
246
Decoded string
Decoded string
button to add an additional condition to your Quick Find. Using the
Or>>
, click the
And
or
Source
dialog comes up with the 8-byte World Wide Name select, plus
Quick Find/Filter/Hide
Decoded field
method will work if you search for "Read(10)" or "SCSI
method when viewing a trace on a remote Xgig
option will not be visible.
Decoded string
feature can also be used with the logical
Quick Find
button, then click the
>>
column on an SOAF Open Address or Identify
Destination
Quick Find/Filter/Hide
Navigating a Trace
method for this type of
button, and it changes to
Or
dialog comes up as follows:
Xgig Analyzer User's Guide
And.