Graphical Display Of Oob And Speed Negotiation Events - Viavi Xgig User Manual

Filter And Hide

Graphical Display of OOB and Speed Negotiation Events

OOB and Speed Negotiation data can be viewed graphically in TraceView. You can graphically
view, scroll, and view greater/lesser detail (zoom) for OOB/SN events. Select
of OOB & SN...
graphical display. See Figure 118.
When viewing a trace file, the OOB Display
menu item and will only be available when you have selected an OOB/SN event on a trace
SN...
captured with the 6G SAS/SATA blade. If you have selected a non-OOB/SN event or the OOB
events are captured with 3G SAS/SATA blades, the button/menu item will be grayed out.
Out-of-band data only applies to SAS/SATA traces, so this button/menu item will also be grayed
out for Fibre Channel and Gigabit Ethernet traces. If the trace was not captured with Xgig
Analyzer 4.0 or later, a dialog will appear with following message:
with Xgig Analyzer 4.0 or later. Graphical display of OOB & Speed Negotiation is not
supported for this trace
Figure 118: Context Menu to Set OOB/SN Graphical Display
If the duration of OOB is more than 300 msec, the
dialog box is presented to select time range, as shown in Figure 119. If the duration of OOB
session is less than 300 msec, time range selection dialog is not presented and the main display for
the viewing OOB/SN events is displayed.
Xgig Analyzer User's Guide
from the event grid context menu or the OOB Display button to bring up the
.
Chapter 13, Configuring Xgig TraceView
button and the Graphical Display of OOB &
This trace is not captured
Select Time Interval for Graphical Display
Graphical Display
275