Viavi Xgig User Manual page 57

Domains, Links, and Sync Groups
• Gigabit Ethernet Delay Emulator
The 3G and 6G Xgig SAS/SATA blade supports SAS/SATA Analyzer and Jammer. The 6G Xgig
SAS/SATA blade also supports SAS/SATA Generator and Target Emulator functionality. The 8G
Fibre Channel blade only supports Fibre Channel Analyzer, BERT, Load Tester, and Jammer
functions. The 10G blade only supports Fibre Channel Analyzer, Gigabit Ethernet Analyzer,
10GigE Load Tester, and 10GigE Jammer.
The following are supported on the Xgig5000:
• The 10G IO blade supports Ethernet Analyzer and Load Tester functions.
• The 12G SAS blade supports SAS/SATA Analyzer, Jammer, and Generator functions.
• The 16G FC blade supports FC Analyzer, Jammer, and Load Tester functions.
The Xgig1000 12G SAS blade supports SAS/SATA Analyzer, Jammer, and Generator functions.
The Xgig1000 4 Port and 8 Port 10G/16G systems support the Analyzer, Jammer, and Load Tester
functions at 10.3125 Gbps in the 10 Gigabit Ethernet protocol. Analyzer and Load Tester are
supported in Analog Passthrough and Digital Retime. Jammer is supported in Digital Retime only.
These systems also support the Analyzer, Jammer, and Load Tester functions at 4.2500, 8.5000, or
14.0250 Gbps in the Fibre Channel protocol.
The Xgig1000 8+2 Port 10G/16G/40G system's eight SFP ports support the Analyzer, Jammer,
and Load Tester functions at 10.3125 Gbps in the 10 Gigabit Ethernet protocol. Analyzer and Load
Tester are supported in Analog Passthrough and Digital Retime. Jammer is supported in Digital
Retime only. The SFP ports also support the Analyzer, Jammer, and Load Tester functions at
4.2500, 8.5000, or 14.0250 Gbps in the Fibre Channel protocol in Analog Passthrough or Digital
Retime. The two QSFP ports support the Analyzer function at 41.2500 Gbps in the 10 Gigabit
Ethernet protocol in Analyzer Passthrough only.
The Xgig1000 2 Port 10G/40G system's two QSFP ports support the Analyzer function at 41.2500
Gbps in the 10 Gigabit Ethernet protocol in Analyzer Passthrough only. The two QSFP ports can
be used as eight SFP ports at 10.3125 Gbps by using two one-to-four break out cables (one for
each QSFP port) with male QSFP and female SFP connectors. See the Xgig1000 Hardware Guide
for more information.
The Xgig1000 PCIe system has two CXP ports (16 lanes), which support the Analyzer function at
2.5, 5.0, and 8.0 GT/s in the PCIe protocol in Analog Passthrough only. This system supports a
trace buffer of 32GB upstream and 32GB downstream per port.
From TraceControl, only Analyzer functions can be used. In the display, ports that have a Jammer,
BERT, Generator, Target Emulator, Delay Emulator, or Load Tester function will display, but will
not be available for use. Xgig ports with another function can be changed to an Analyzer function
if the port is not locked by another user and the blade has the proper license.
To change a port function:
Select the port you want to change by right-clicking it.
1
Xgig Analyzer User's Guide
Chapter 3, Getting Started with Xgig TraceControl
43