Out-Of-Band Data (Sas/Sata Only) - Viavi Xgig User Manual

Chapter 13, Configuring Xgig TraceView
• AIP(s)
• OPEN_ACCEPT
• OPEN_REJECT(s)
• DONE(s)
• CLOSE(s)
• BREAK
The following primitives are displayed when you select
Ordered Sets
• RRDY
• ACK
• NAK(s)
• SATA_R_OK
• SATA_R_ERR
• SAS_ERROR
• SATA_ERROR
• HARD_RESET
• OPEN_ACCEPT
• OPEN_REJECT(s)
• CLOSE(s)
Primitives Displayed with Ordered Set Options, Fibre Channel
All Fibre Channel ordered sets display when you select the
The
Show Connection Only Ordered Sets
Ordered Sets

Out-of-Band Data (SAS/SATA Only)

Press the
trace. Hiding OOB data can decrease the amount of data in the main spreadsheet when it is not
necessary to see these commands. OOB commands only apply to SAS/SATA. For other protocols,
this button is disabled.
You can refine the display to show advanced OOB Events. Use the drop-down menu next to the
OOB Data
Events, or deselect the button to hide all OOB information.
If you set the option to
display. The display/hide of OOB events works by toggling the button. When you select the
button, basic OOB events will display. When you de-select the button, no OOB events will
display.
262
and then display ordered sets for SAS/SATA:
options are not available for Fibre Channel.
Show OOB Data button to toggle between showing and hiding OOB data in the
button to select either Show Only Basic OOB Events
Show Only Basic OOB Events
Show Acknowledgment and Error Only
Show All Ordered Sets
and
Show Acknowledgment and Error Only
or Show Advanced OOB
(default value), only essential OOB events
Filter And Hide
option.
Xgig Analyzer User's Guide