Viavi Xgig User Manual page 76

Chapter 3, Getting Started with Xgig TraceControl
The top portion of the
current link configuration. It is the same dialog as visible inside the Discovery dialog's Link
Configuration, except that the wire colors uniquely identify port groups.
Use the drop-down menu to select a tuning method. You can choose from the following options:
• Auto-select the best preset
• Auto-tune
• Change to [preset name]
Auto-select the best preset
To automatically select the best preset, select
drop-down menu. Then, click the
from the list of saved presets and applies that tuning preset to the hardware. This selection is based
on the preset with the lowest bit error rate (BER). When the preset selection is complete, a dialog
is displayed showing the selected preset.
The Save
Click the
name of the preset selected is shown as the current tuning.
Click the
62
12G SAS Link Tuning
Apply Changes
area is reserved for future use.
Back button to close the dialog and returns to the
button to close the dialog and return to the
Exit
dialog displays the lane steering diagram for the
Auto-select the best preset
button. The software selects the best preset
SAS Link Tuning
TraceControl
Xgig Analyzer User's Guide
Tuning for 12G SAS
from the Tunings
dialog where the
window.