Quick Hide - Viavi Xgig User Manual

Filter And Hide
If you set up a Quick Filter using two filtering operations, each filter operation is listed separately
in the Quick Filter list. The last column in the table shows that all rows are ANDed for the filter
operation; in other words, adding rows narrows the data in the decode display.
A Quick Filter list also exists for Dword view and Exchanges View. The Quick Filter list for
Dword and Exchanges View are completely separate from the list for the main spreadsheet display.
Make sure you have selected the correct display (main spreadsheet, Dword, or Exchanges View)
before you select
and Exchanges View will have the view's name in the window title bar.
Filter SAS 8-Byte World Wide Names
See "Search for SAS 8-Byte World Wide Names" on page 246
feature. The feature works the same for Quick Filter as for Quick Find.

Quick Hide

Use Quick Hide to filter out frames or other event information that you want to remove from the
spreadsheet view. Quick hide is primarily for hiding events based on the value of fields as you find
them in the display. For example, hide all data from Port 3. For more complex filtering operations,
see the Detailed Find/Filter/Color window.
Once you have set up a Quick Hide, use the
Quick Hide condition. Multiple Quick Hides can be created and Quick Hides can be completely
removed rather than disabled. Use the
remove conditions in the Quick Hide list. See
information on removing Quick Hides.
An example Quick Hide window is shown below. The Quick Hide window was created after
double-clicking an event in the
Figure 112: Quick Hide Example
The Quick Find/Filter/Hide
For the Summary
of visible fields in the column.
If you double-click in the
Filter/Hide
or the last visible field if the column is right-aligned.
To hide data:
1 Right-click the column value in an event row that you wish to hide.
Select
2
Xgig Analyzer User's Guide
Quick Filter List from the
DTPort
dialog field combo box contains only the fields for the current event.
, Source , and Destination
Summary
dialog comes up with the first visible field in the column if the column is left-aligned,
Quick Find/Filter/Hide....
Chapter 13, Configuring Xgig TraceView
Tools menu. The Quick Filter List for Dword view
ApplyQuick Hide
button to bring up the dialog to view/
Quick Hide list...
"Multiple Quick Hides" on page 257
column and then selecting the
columns, the combo only gives a choice of the subset
column (or any other compound column), the
The
Quick Find/Filter/Hide
for a detailed description of the
button to enable or disable the
for more
radio button.
Hide
Quick Find/
dialog box appears.
255