Chapter 12 Getting Started With Xgig Traceview; Launching Xgig Traceview; Secure Login For Xgig Chassis; Launching The Traceview Application - Viavi Xgig User Manual

Chapter 12, Getting Started with Xgig TraceView

Launching Xgig TraceView

Secure Login for Xgig Chassis

Xgig chassis may be password protected to prevent access by unauthorized users. Password
protection is set through the Xgig Web Utility for each Xgig chassis. If the Xgig chassis you are
attempting to access is password protected, you are required to provide the password. The
following login screen will appear. Enter the password to continue; the account name is always
Administrator.
Figure 93: Xgig Analyzer Login
Login is only required once from any of the Xgig Analyzer applications or Xgig Maestro running
on the same Xgig Analyzer PC client machine. For example, if you login through TraceControl,
you will not be asked for the password again when you access the same Xgig chassis Sync Group
through Xgig TraceView. To make sure you are completely logged off from all Xgig chassis, you
must close all Xgig applications.
For login, the settings of a master chassis in a Sync Group prevail for all chassis in the Sync
Group. If the master has authentication turned off and a slave(s) has authentication turned on, then
the Sync Group as a whole has authentication turned off. The settings for the master chassis also
prevail for the password; the password of the master chassis will be the password of any attached
slave. See
the Xgig5000 Family Hardware Guide, or the Xgig1000 Hardware Guide for more information on
master, slaves, and Sync Groups.

Launching the TraceView Application

Launch TraceView by pressing the
TraceControl. If you start TraceView from TraceControl and TraceControl has been used to
capture traffic, the current contents of the analyzer devices will display in TraceView when you
start the program. You can select
hardware ports and view the data in hardware buffers.
If you are using TraceView independently from TraceControl, select
menu to select the trace file you want to analyze.
214
"Xgig Blade and Port Numbering" on page 45
TraceView
Open Domain...
Launching Xgig TraceView
and the Xgig Family Hardware Guide,
icon on the desktop or by pressing the same icon in
from the File menu to select a domain of
Open File...
Xgig Analyzer User's Guide
from the
File