Using the Traffic Summary Pane
The Traffic Summary for Fibre Channel provides counters for various metrics. Specifically,
Traffic Summary provides the following counters for each of the Fibre Channel frames.
•
Basic Link Services
one counter per request, accept, and reject reason
•
Link Control Frames
one counter per link control frame
•
Extended Link Services
one counter per request, accept, and reject reason
•
Fibre Channel Generic Services
one counter per request, accept, and reject reason
•
FC Switch Fabric Services
one counter per request, accept, and reject reason
•
SCSI over Fibre Channel
•
SCSI Commands
one counter per 8-bit SCSI opcode
•
SCSI Task Management
one counter per SCSI Task Management IU
•
SCSI Responses
•
•
•
FCP_CONF Frames
FCP_CONF frames
•
Frames by Source/Destination
up to 126 pairs of S_Id - D_Id values
•
Frames by Type
256 counters for all possible 8-bit Fibre Channel Header Type values defining payload type
•
Frames by Class of Service
five counters for SOF class
•
Frames by Sequence Type
four counters for SOF type
Frame Delimiters
This metric contains one counter for each Start of Frame (SOF) and one for each End of Frame
(EOF).
Xgig Analyzer User's Guide
SCSI Status
one counter per SCSI status
SCSI Response Codes
one counter per FCP response code
Chapter 14, Using the Secondary Panes in Xgig TraceView
357