Viavi Xgig User Manual page 316

Chapter 13, Configuring Xgig TraceView
Source and Destination Columns
The
Destination; Group
and it only displays the ones that are available in the current frame. Following is an example of
the
Destination
The address fields display the MAC address followed by the IP address followed by the TCP port
number. It is possible to view and control which addresses are displayed in the
columns. Select the addresses to display by clicking the right mouse in column header and
Source
selecting
For the PCIe protocol, the
Destination ID fields. These fields are interpreted with the Vendor ID/Device ID information
provided in the
are displayed as the raw 16-bit hexadecimal value.
The Source
displayed for the
Note that the settings on which address is displayed is persistent across configuration files.
The Source
up the Quick Find/Filter/Hide
LUN Column
The LUN
• XPT LUN (SAS and FC): Generated by Expert, LUN in the first frame of the conversation
propagated to all the frames of the conversation.
• LUN: Logical Unit Number found in the first frame of the conversation only.
• Targ Lun: Generated by Expert, target's real LUN derived from the iSCSI Exchange.
302
Field Group column contains all the destination fields for all protocols
column for iSCSI:
.
Display Addresses
Source/Destination
Devices And Addresses
column works in the same way as the
Destination column, the
and Destination columns are right-aligned. When you double-click them, they bring
dialog on the first field visible on the right side of the column.
column displays one of the following fields (by order of importance):
columns contain the TLP Source ID and
dialog (under the PCIe Optional node). Otherwise, they
Destination column. If change the addresses
Source column automatically syncs up, and vice-versa.
Working With Columns
or
Destination
Xgig Analyzer User's Guide