Ports Side-By-Side Configuration Tab - Viavi Xgig User Manual

TraceView Options
Figure 185: Xgig TraceView Options Dialog Box, Expert/Protocol Decodes Tab

Ports Side-by-Side Configuration Tab

The Ports Side-By-Side Configuration
the Port Side-By-Side view.
• Display frame summary in a single line
Select this option to display a frame summary only as a separate row within the spreadsheet
for Port Side-By-Side view.
•
Display frame header in a single line
Select this option to display each frame header as a separate row within the spreadsheet for
Port Side-By-Side view. Frame summaries are also displayed as a separate row.
•
Display 1 word per line like in the inspector
Select this option to display each Dword as a separate row within the spreadsheet for Port
Side-By Side view. Partial information for each Dword may be displayed. Use the check
boxes under this option to set the options you want to display. You can also set the maximum
number lines for a single frame. For example, if the maximum number is set to 10, only the
first 10 Dwords for that frame will be displayed.
In Port Side-By-Side configuration, frame summaries, frame headers, or Dwords are displayed
separately for logical links within a multiplexed port.
Xgig Analyzer User's Guide
Chapter 19, Xgig TraceView Tools
tab provides three mutually exclusive options for setting
411