Hardware Options; Port Settings - General Settings Tab - Viavi Xgig User Manual

Hardware Options

Hardware Options
Hardware options set the hardware link speed, hardware signal regeneration, Scrambling, FEC,
CDR, Force Clock Re-Clock, and for PCIe, lane control.

Port Settings - General Settings Tab

The General Settings
Performance Monitor. This section explains the settings available in this tab.
Each port-pair has a separate link speed setting. The signal can also be digitally retimed or set for
analog passthrough. Select
the ports are not locked by the TraceControl application. The Link Speed and Signal Regeneration
Settings dialog box appears showing all ports monitored. The settings that display initially are
those currently set for each hardware port.
For FC ports set to 4.2500 or 8.5000 Gbps, Scrambling settings are shown. For FC ports set to
14.0250 Gbps and for 10GigE ports, FEC settings are shown.
If another user has locked the analyzer port, you cannot change the options.
Figure 78: Link Speed and Signal Regeneration Settings
Link Speed
See "Link Speed" on page 95
types.
Xgig Analyzer User's Guide
Chapter 10, Xgig Performance Monitor Configuration
tab in TraceControl's Configuration Manager
Port Settings... from the
for more information about setting the link speed for various blade
is also shown in
Hardware menu to set these options when
189