Viavi Xgig User Manual page 126

Chapter 4, Xgig TraceControl Capture Configuration
Create capture filters by selecting a state bubble and dragging templates from the
Templates Browser
Templates Browser
all available templates. See
you drag the templates into the panes, the template names appear within the selected state bubble.
Figure 51: Capture Filter Editor
If the trigger mode is set to a type of trigger that allows three-state or multi-state (Advanced)
triggering, you can specify different capture filters for different states.
Note: Multi-state triggering is only available for 6G SAS/SATA, 12G SAS, and PCIe. This
option is not available in a mixed-port environment. All ports in a domain must be 6G SAS/
SATA, 12G SAS, or PCIe for the Advanced Triggering option to be present in the Trigger
mode menu. See
The Capture Filter Editor contains two panes. Drag templates into the
capture only the events that match any of the conditions in the pane. Data will be captured if any
one of these conditions are met. Drag templates into the
that match the all of the conditions in the pane. These two panes also have "Clear" and "Default"
links in the upper, right corner to clear the contents of the panes or restore the list of templates to
the default.
112
into the
Capture These/But Not These
is the area to the left of the configuration area that contains a tree structure of
"Available Templates Browser" on page 310
"Multi-State Triggering" on page 126
Capture and Trigger Setup
panes of the editor. The
for more information. As
Capture Filter Editor
for more information.
Capture These
But Not These pane to exclude the events
Xgig Analyzer User's Guide
Available
Available
pane to