Viavi Xgig User Manual page 46

Chapter 3, Getting Started with Xgig TraceControl
Figure 10: Select Ports for Domain Creation Dialog
Discover Chassis on Different Subnets
To select Sync Groups on a different subnet, enter the IP Address or DNS name in the Address
field and press Discover (top of the dialog). The specific Sync Group you requested and all other
Sync Groups on the same remote subnet will be added to the left panel.
If you are an Administrator on a Microsoft Windows system with Windows Firewall enabled and
you open the Select Ports for Domain Creation dialog box of TraceControl for the first time, the
firewall will prompt you to unblock
xgig-tracecontrol.exe
subnet to be discovered. If you are a Standard User, you will need the Computer Administrator to
unblock
xgig-tracecontrol.exe
box of TraceView
monitor.exe
For Microsoft Windows Server operating systems, Windows Firewall must be disabled to allow
the other Sync Groups in the same subnet to be discovered irrespective of whether you are an
Administrator or a Standard User.
32
xgig-tracecontrol.exe
as a firewall exception to allow the other Sync Groups in the same
. This also applies to the corresponding "discovery" dialog
(xgig-traceview.exe
) and Expert (
xgig-expert.exe
Domains, Links, and Sync Groups
. Click
), Performance Monitor (
xgig-performance
).
to add
Unblock
Xgig Analyzer User's Guide