Viavi Xgig User Manual page 79

Tuning for 12G SAS
When the tuning is done, the dialog displays the finished page with the final status and the
duration of the tuning.
In the
Save
default and is not editable. The default name of the auto-tuning is MyLastTuning. You can change
the name by typing another name into the text field. When you enter a new name, a
displayed. Click the
Click the
Click the
Change to [preset name]
To load a preset on the ports in a configuration, click
drop-down list. Then, click the
the preset configuration hardware and returns to the
In addition to the default settings, the tuned settings that you have saved after auto-tuning are also
available.
The Manage Presets...
All the presets are listed in the right column. The left column shows the port groups affected by
each preset. You cannot rename or delete the factory provided presets, nor any preset currently in
use.
Xgig Analyzer User's Guide
area, the group and the name of the tuning is displayed. The group is provided by
button to save the auto-tuning with the new name.
Save
button to close the dialog and returns to the
Back
Exit button to close the dialog and return to the
Apply Changes
button opens a dialog allowing you to delete or rename presets.
Chapter 3, Getting Started with Xgig TraceControl
SAS Link Tuning
TraceControl window.
Change to [preset name]
button. The software applies the tuned settings of
TraceControl window.
button is
Save
dialog.
from the Tunings
65