Viavi Xgig User Manual page 103

Configure Ports or Domains
Phy Errors
Select the
monitored by Port Status View LEDs. Errors are grayed out if they are not supported for the ports
being monitored. This does not apply to Loss of Sync (LOS) errors.
Check the box for all error types to be included. Unselected error types are not used in determining
the value of status LEDs for a port. For example, if CV errors are not selected, and the only errors
detected for a port are CV errors, the status light for that port will remain green.
SAS/SATA Errors
Select the
errors to be monitored by Port Status View LEDs. These options will be gray if there are no SAS/
SATA Analyzer ports currently being monitored.
Check the box for all error types to be included. Unselected error types are not used in determining
the value of status LEDs for a port. See
on page 343
PCIe Errors
Select the
monitored by Port Status View LEDs. These options will be gray if there are no PCIe Analyzer
ports currently being monitored. See
the PCIe errors.
Check the box for all error types to be included. Unselected error types are not used in determining
the value of status LEDs for a port.
Chart Options
The options on the
as well as scaling options for the strip chart. You can also access the
the Strip Chart
Color Options
Select the color for the strip chart graph using the
for the strip chart using the
background.
Scaling Options
These options control the scaling display of the
can be done by port-pair/link or domain. If the scaling is set to domain, the scale for the strip chart
graph will be the same for all ports. If the scaling is set by port-pair/link, the same scaling is
applied to all ports in a link. If ports are not part of link, the same scaling is applied to both ports in
a port-pair.
Xgig Analyzer User's Guide
tab from the
Phy Errors Options
SAS/SATA Errors tab from the
for a description of all SAS/SATA Errors.
PCIe Errors tab from the
Charts tab control the color display of the
field for any port or link in TraceControl's main window.
Background
Chapter 4, Xgig TraceControl Capture Configuration
dialog box to select the specific physical errors to be
Options dialog box to select the specific SAS/SATA
Table 30, "Traffic Summary SAS/SATA Error Counters,"
Options dialog box to select the specific PCIe errors to be
Table 14, "PCIe Errors," on page 204
Strip Chart
Chart button, and select the background color
button. The default graph color is green with a white
Strip Chart in the
for a description of all
in the Port Status View
Charts tab by right-clicking
Port Status View . The scaling
89