Viavi Xgig User Manual page 267

Filter And Hide
•
Decoded string
Important: The
Chassis server software to version 3.2.
Advanced Quick Filter
You can use Quick Filter to set up more elaborate filtering operations. You can change the type of
field, the logical operator, or the value of the field.
For columns containing numerical data, the
operators equal to (=), not equal to (!=), (&) and, less than (<), greater than (>), Match if the value
is anyone in the comma-separated list (in), Do not match if the value is anyone in the
comma-separated list (! in), Match if the value is within the dash-separated range X-Y specified
(where X and Y are included in the comparison) (range), and Do not match if the value is within
the dash-separated range X-Y specified (!range).
You can also use the
button to add another condition means that Events containing either condition will be
Or>>
displayed. Use the pull-down menus to select the field and the value of the field for the second
Quick Filter. You can also use the
conditions together.
Filter Source/Destination Addresses
When you double-click in a cell under the
dialog comes up with a combination of the
Hide
For example, if you double-click in the
Find/Filter/Hide
Filtering using such criterion allows you to quickly isolate all conversations to and from one host
with ID 000001. Repeating this step with another host will result in filtering on all conversations
between 2 hosts. In the example below, the result has been filtered a 2nd time with the ID =
0000BC. This results in filtering on all conversations between 000001 and 0000BC:
Xgig Analyzer User's Guide
method is only available if you have upgraded your Xgig
EBCDIC string
button to add an additional condition to your Quick Filter. Using the
Or>>
Quick Filter list...
Destination
dialog comes up as follows:
Chapter 13, Configuring Xgig TraceView
Quick Filter feature can also be used with the logical
button to select another Quick Filter to OR
Source or Destination column, the
OR
Source Destination
column on a Fibre Channel frame, the
Quick Find/Filter/
column automatically.
Quick
253