Lan Conversation Frame Editor - Viavi Xgig User Manual

Template Editor
Figure 66: Lane Selection

LAN Conversation Frame Editor

The LAN Conversation template in the Available Templates Browser uses the LAN Conversation
Frame Editor instead of the Standard Template Editor. The LAN Conversation template is only
available for GigE ports. The types of changes you can make with the
are:
Editor
•
Frame Byte-Pattern Definitions
To change the byte contents of the frame template, enter values in the byte display. You can
also enter hex values (or Xs for "don't care" bits) directly into the offsets on the left.
• Bit-Pattern Definitions
Bit level definitions for any byte can be specified. Select a byte within a template displayed in
the template editor and press the
The bit-level pattern editor is a selection box for describing a bit pattern for the selected byte
within the template.
• Add Conversations
The area below the byte display table in the
provided to quickly define and add an address byte pattern to a template.
•
Add Ports
The area below the Add Conversation to Template section in the
Editor
template.
See Figure 67 for an example of the
Xgig Analyzer User's Guide
dialog box is provided to quickly define and add a port byte pattern (port number) to a
LAN Conversation Frame Editor
Chapter 5, Template Browser/Template Editor
Set Bit Pattern button to bring up the bit-level pattern editor.
LAN Conversation Frame Editor
LAN Conversation Frame
dialog box is
LAN Conversation Frame
dialog box.
151