Viavi Xgig User Manual page 246

Chapter 13, Configuring Xgig TraceView
Figure 102: Port Groups Dialog Box
Press the
2
3 It is suggested that you rename the group within the
the Group List
names must be unique.
4 Drag-and-drop ports from the
port that already exists in the group, the port will blink several times.
Press
5
You can modify or delete a Port Group by bringing up the
additional ports to the group. To delete a port or Port Group, select it and press the
For multiplexed data, each link within the single physical port is selected and added separately to
the port group. For example,
ports with the port group display and each can be added to the port group.
Selecting Port Groups
Use the Port Groups
display. The pull-down shows options for selecting all ports, links, user-defined port groupings,
port-pairs, single ports, ports annotated by Expert, or single links within multiplexed ports.
Different selections types are divided by a dashed line, as shown in Figure 103.
Refer to "Working with Traces Annotated by Expert" on page 382
creating Expert traces.
232
button to create a new Port Group. A default name is supplied.
New
box, press , or click the Port Group name. Type in the new name. Port group
F2
Port List
to exit the dialog.
OK
SAS Port (1,2,1) - 0
pull-down menu on the toolbar to select the group to apply to the entire
Group List box. Select the Port Group in
box to the new group list. If you attempt to insert a
Port Groups
and SAS Port (1,2,1) - 1
for more information on
TraceView Configuration
dialog box. Drag-and-drop
Delete button.
will appear as separate
Xgig Analyzer User's Guide