Viavi Xgig User Manual page 247

TraceView Configuration
Figure 103: Port Selection Menu
Select All Ports
Select Ports by
User-Defined Group
Select Logical Link
Port Grouping
Select Single Port
Some examples of port selection are shown in Figure 104.
Figure 104: Port Selection Menu Examples
Select All Ports
For multiplexed ports, ports can be selected by single physical port, single logical link, or single
side of a logical link. Remember that if a single physical port is selected (for example,
(1,2,1) - 0
two different logical links. Some examples of port selection for multiplexed ports are shown in
Figure 105.
Xgig Analyzer User's Guide
Select Ports By Type
and ) you will see the trace information for one-half the traffic of
SAS Port (1,2,1) - 1
Chapter 13, Configuring Xgig TraceView
Select Ports By Link
(SAS/SATA only)
Select Ports By Type
(FC, GE, SAS/SATA, Expert)
Select Muxed Ports in
Single Physical Port
(SAS/SATA only)
Select User-Defined Port Group
SAS Port
233