Meter View; List View - Viavi Xgig User Manual

Chapter 10, Xgig Performance Monitor Configuration

Meter View

Meter View
status. The
port.
Right-click
for the meters is done automatically and does not require configuration. All MByte meters will
have the same scale and all KFrame meters will have the same scale. However, the MByte and
KFrame meter scaling are independent of each other and solely based on the port that contains the
highest data rate in the configured domain.
MByte meters can be changed to display as a utilization percentage. Right-click the graph and
select the
all data over time can be logged in .csv files; see
When the Frame Type tab of the Preferences dialog is set to SCSI Frames, the Meter View will
display SCSI Megabytes per second and SCSI Kilo Commands per second. This option is
available for 1/2/4/8G Fibre Channel ports only.
An example of Meter View is shown in Figure 74.
Figure 74: Xgig Performance Monitor Meter View

List View

The List View
rate in KFrames/sec, data transfer rate in MBytes/sec, frame errors, SAS/SATA error counters,
PCIe errors, and phy errors. A
Resource Browser. The statistical information is presented on several tabs within the view, so you
can easily access the columns of information you want to view. The number of statistical tabs
available is dependent on the types of analyzer ports configured in the domain.
182
displays the progression of data collection as an analog meter with a needle indicating
presents the current transfer rate in Mbytes/sec and KFrames/sec for each
Meter View
to access the
Meter View
Show Utilization option. See
presents vital statistics of each analyzer port or link such as utilization, data transfer
Total
and
Preferences Metric Options
"Utilization Display Option" on page 205.
"Statistics Logging Function" on page
row is also displayed depending on the selection from the
Monitor Views
dialog boxes. All scaling
Snapshots of
207.
Xgig Analyzer User's Guide