Generating Ltssm Data - Viavi Xgig User Manual

Chapter 14, Using the Secondary Panes in Xgig TraceView

Generating LTSSM Data

When a new capture is opened in TraceView, LTSSM data is not generated until you select
Generate LTSSM Data...
dialog box is displayed to allow you to select the link, and the starting and ending times. Click the
button to start generating the LTSSM data.
Start
Figure 161: Generate LTSSM Data Dialog Box
When you click the
not correct an error dialog is displayed describing which filter setting to use in TraceControl to
recapture the trace. The LTSSM generation will not be allowed to proceed until the recapture is
performed using the correct filter setting.
Figure 162: Error Message
If the filter settings are valid LTSSM engine will start processing the trace in the background a
progress dialog is displayed.
360
from the menu to open the Generate LTSSM Data dialog box. This
File
Start button, filter settings used for the capture are validated. If the settings are
Using the LTSSM Panes for PCIe
Xgig Analyzer User's Guide