Configuration Statements For Snmp - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 443: SNMP Configuration Page (continued)
Field Function
Rising Threshold Specifies the value at which SNMP generates an event
(trap and system log message) when the value of a
sampled indicator is increasing.
For example, if the rising threshold is 90 (the default),
SNMP generates an event when the value of any key
indicator reaches or exceeds 90 percent.
Falling Specifies the value at which SNMP generates an event
Threshold (trap and system log message) when the value of a
sampled indicator is decreasing.
For example, if the falling threshold is 80 (the default),
SNMP generates an event when the value of any key
indicator falls back to 80 percent or less.
Related
Documentation

Configuration Statements for SNMP

[edit snmp] Configuration Statement Hierarchy
Related
Documentation
3312
Monitoring System Process Information on page 554
Monitoring System Properties on page 550
[edit snmp] Configuration Statement Hierarchy on page 3312
snmp {
rmon {
history index {
bucket-size number;
interface interface-name;
interval seconds;
owner owner-name;
}
}
}
Configuring SNMP (J-Web Procedure) on page 3309
Junos OS Network Management Configuration Guide at
http://www.juniper.net/techpubs/software/junos/
Your Action
Enter a value from 0 through 100. The default
value is 90.
Enter a value from 0 through 100. The default
value is 80.
NOTE: The falling threshold value must be less
than the rising threshold value.