Trap-Options - Dell PowerConnect J-EX4200-24T Software Manual

trap-options

Syntax
Hierarchy Level
Release Information
Description
Default
Required Privilege
Level
Related
Documentation
type
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
trap-options {
agent-address outgoing-interface;
source-address address;
}
[edit snmp]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Using SNMP trap options, you can set the source address of every SNMP trap packet
sent by the router to a single address, regardless of the outgoing interface. In addition,
you can set the agent address of each SNMPv1 trap. For more information about the
contents of SNMPv1 traps, see RFC 1157.
The remaining statements are explained separately.
Disabled
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring Source and Agent Addresses for SNMP Traps
type (inform | trap);
[edit snmp v3 notify name]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Configure the type of notification.
—Defines the type of notification as an inform. SNMP informs are confirmed
inform
notifications.
—Defines the type of notification as a trap. SNMP traps are unconfirmed notifications.
trap
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring SNMP Informs
Configuring the SNMPv3 Trap Notification
Chapter 128: SNMP
3363