Show Link-Management Statistics - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

show link-management statistics

Syntax
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
List of Sample Output
Output Fields
Table 417: show link-management statistics Output Fields
Field Name Field Description
Number of received packets by message type. If the count for a message type is zero, that message
Received packets
type is not displayed. If the count for all message types is zero, this field is not displayed.
Number of received bad packets by message type. If the count for a message type is zero, that message
Received bad packets
type is not displayed. If the count for all message types is zero, this field is not displayed.
Number of packets that are too small.
Small packets
Number of packets specifying the wrong LMP version.
Wrong protocol version
Number of packets destined for an unknown peer.
Messages for unknown
peer
Number of packets indicating a state that does not match the recipient.
Messages for bad state
Number of
Stale acknowledgments
Number of
Stale negative
acknowledgments
3176
show link-management statistics
<peer <name name>>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display statistical information for Link Management Protocol (LMP) packets.
—Display information for all peers.
none
—(Optional) Display information for all peers or for the specified peer
peer <name name>
only.
view
show link-management on page 3168
show link-management peer on page 3171
show link-management routing on page 3173
show link-management te-link on page 3178
show link-management statistics on page 3177
Table 417 on page 3176 describes the output fields for the
command. Output fields are listed in the approximate order in which they appear.
and
configAck LinkSummaryAck
and
configNack LinkSummaryNack
show link-management statistics
packets received that have a stale message ID.
packets received that have a stale message ID.