Show Rsvp Session - Dell PowerConnect J-EX4200-24T Software Manual

show rsvp session

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
show rsvp session
<brief | detail | extensive | terse>
<bidirectional | unidirectional>
<bypass>
<down | up>
<interface interface-name>
<logical-system (all | logical-system-name)>
<lsp-type>
<name session-name>
<p2mp>
<session-type>
<statistics>
<te-link te-link>
show rsvp session
<brief | detail | extensive | terse>
<bidirectional | unidirectional>
<bypass>
<down | up>
<interface interface-name>
<lsp-type>
<name session-name>
<p2mp>
<session-type>
<statistics>
<te-link te-link>
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display information about Resource Reservation Protocol (RSVP) sessions.
none —Display standard information about all RSVP sessions.
brief | detail | extensive | terse
bidirectional | unidirectional
unidirectional RSVP sessions only, respectively.
—(Optional) Display RSVP sessions for bypass LSPs.
bypass
—(Optional) Display only LSPs that are inactive or active, respectively.
down | up
interface interface-name —(Optional) Display RSVP sessions for the specified interface
only.
logical-system (all | logical-system-name)
systems or on a particular logical system.
—(Optional) Display information about RSVP sessions with regard to LSPs:
lsp-type
—Sessions used for bypass LSPs.
bypass
Chapter 125: Operational Mode Commands for MPLS
—(Optional) Display the specified level of output.
—(Optional) Display information about bidirectional or
—(Optional) Perform this operation on all logical
3221