Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
allow-remote-loopback
Syntax
Hierarchy Level
Release Information
Description
Required Privilege
Level
Related
Documentation
3442
allow-remote-loopback;
[edit protocols oam ethernet link-fault-management interface interface-name]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Advertise that the interface is capable of getting into loopback mode. Enable remote
loopback in Ethernet OAM link fault management (LFM) on all Ethernet interfaces or the
specified interface on the J-EX Series switch.
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Example: Configuring Ethernet OAM Link Fault Management on J-EX Series Switches
on page 3428
Configuring Ethernet OAM Link Fault Management (CLI Procedure) on page 3431