Show Mpls Diffserv-Te - Dell PowerConnect J-EX4200-24T Software Manual

show mpls diffserv-te

Syntax
Syntax (J-EX Series
Switch)
Release Information
Description
Options
Required Privilege
Level
List of Sample Output
Output Fields
show mpls diffserv-te show mpls diffserv-te
show mpls diffserve-te
<logical-system (all | logical-system-name)>
show mpls diffserve-te
Command introduced before Junos OS Release 10.2 for J-EX Series switches.
Display Multiprotocol Label Switching (MPLS) label-switched path (LSP) Differentiated
Services (DiffServ) class and preemption priority information.
—Display DiffServ classes and priorities used by MPLS LSPs.
none
logical-system (all | logical-system-name)
systems or on a particular logical system.
view
show mpls diffserv-te on page 3185
Table 422 on page 3185 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
Table 422: show mpls diffserv-te Output Fields
Field Name
Bandwidth model
TE class
Traffic class
Priority
user@host> show mpls diffserv-te
Bandwidth model: Maximum Allocation Model with support for E-LSPs.
TE class Traffic class
Chapter 125: Operational Mode Commands for MPLS
—(Optional) Perform this operation on all logical
Field Description
Bandwidth constraint model supported. The maximum allocation
model (MAM) for EXP-inferred LSPs (E-LSPs) is currently supported.
DiffServ traffic engineering class.
MPLS class type that corresponds to the DiffServ traffic engineering
class:
—Best effort
ct0
—Assured forwarding
ct1
ct2 —Expedited forwarding
—Network control
ct3
MPLS preemption priority for this class type, a value from
. Interior gateway protocols (IGPs) distribute information about
7
the available bandwidth for each traffic engineering class.
Priority
command.
show mpls diffserv-te
through
0
3185