Mip-Half-Function (J-Ex Series Switch Only) - Dell PowerConnect J-EX4200-24T Software Manual

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS

mip-half-function (J-EX Series Switch Only)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
3490
mip-half-function (none | default | explicit);
[edit protocols oam ethernet connectivity-fault-management maintenance-domain
domain-name]
Statement introduced in Junos OS Release 10.2 for J-EX Series switches.
Specify the OAM Ethernet CFM maintenance domain MIP half functions.
NOTE: Whenever a MIP is configured, the MIP half function value for all
maintenance domains and maintenance associations must be the same.
none —Specify to not use the mip-half-function.
—Specify to use the default mip-half-function.
default
—Specify an explicit mip-half-function.
explicit
interface—To view this statement in the configuration.
interface-control—To add this statement to the configuration.
Configuring Ethernet OAM Connectivity Fault Management (CLI Procedure) on page 3468
Junos OS Network Interfaces Configuration Guide at
http://www.juniper.net/techpubs/software/junos/