View (Configuring A Mib View) - Dell PowerConnect J-EX4200-24T Software Manual

view (Configuring a MIB View)

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
view view-name {
oid object-identifier (include | exclude);
}
[edit snmp]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Define a MIB view. A MIB view identifies a group of MIB objects. Each MIB object in a view
has a common OID prefix. Each object identifier represents a subtree of the MIB object
hierarchy. The statement uses a view to specify a group of MIB objects on which to
view
define access. To enable a view, you must associate the view with a community by
including the statement at the
view
level.
NOTE: To remove an OID completely, use the
command but omit the
—Name of the view
view-name
The remaining statement is explained separately.
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring MIB Views
Associating MIB Views with an SNMP User Group
community on page 3320
[edit snmp community community-name]
delete view all oid oid-number
parameter.
include
Chapter 128: SNMP
hierarchy
3369