Dell PowerConnect J-EX4200-24T Software Manual page 3308

Dell PowerConnect J-Series Ethernet Switch Complete Software Guide for Junos OS
Table 434: show ted database Output Fields (continued)
Field Name Field Description
Age(s) How long since the node was last refreshed, in seconds.
LnkIn Number of nodes pointing toward this node.
Number of nodes to which this node points.
LnkOut
Protocol that reported the node information:
Protocol
IS-IS(1)
IS-IS(2)
OSPF (area-number)
To Address on the far end of a link.
Local Address of the local interface being used to reach the remote node.
Remote Address of the interface on the remote node.
Configured traffic engineering metric.
Metric
Total interface bandwidth in bps.
Static BW
Subscription factor for the interface, which is the percentage of the link
Reservable
bandwidth that can be used for the RSVP reservation process. You configure
bandwidth
this by including the
(Must include
Available BW
bandwidth actually reserved by RSVP for each priority level. The bandwidth
[priority]
shown is for the entire interface, not for each individual LSP.
Bandwidth constraint model used by the LSPs.
Diffserv-TE BW
Model
(Must include the
Available BW
[TE-class] bandwidth actually reserved by RSVP for each traffic engineering class.
Static BW Total interface bandwidth used by an MPLS traffic class, in bps.
[CT-class]
3236
—IS-IS Level 1.
—IS-IS Level 2.
—OSPF from the specified area.
subscription statement when configuring RSVP.
statement when configuring LSPs) Amount of
diffserv-te
statement when configuring LSPs) Amount of
diffserv-te
Level of Output
All levels
All levels
All levels
All levels
detail extensive
detail extensive
detail extensive
extensive
extensive
extensive
extensive
extensive
extensive
extensive