Request-Type - Dell PowerConnect J-EX4200-24T Software Manual

request-type

Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
rising-event-index
Syntax
Hierarchy Level
Release Information
Description
Options
Required Privilege
Level
Related
Documentation
request-type (get-next-request | get-request | walk-request);
[edit snmp rmon alarm index]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Extend monitoring to a specific SNMP object instance (
to all object instances belonging to a MIB branch (
to the next object instance after the instance specified in the configuration
( ).
get-next-request
get-next-request —Performs an SNMP get next request.
—Performs an SNMP get request.
get-request
—Performs an SNMP walk request.
walk-request
Default: walk-request
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Request Type
variable on page 3368
rising-event-index index;
[edit snmp rmon alarm index]
Statement introduced before Junos OS Release 10.2 for J-EX Series switches.
Index of the event entry that is used when a rising threshold is crossed. If this value is
zero, no event is triggered.
—Index of the event entry that is used when a rising threshold is crossed.
index
Range: 0 through 65,535
Default: 0
snmp—To view this statement in the configuration.
snmp-control—To add this statement to the configuration.
Configuring the Falling Event Index or Rising Event Index
falling-event-index on page 3326
Chapter 128: SNMP
), or extend monitoring
get-request
walk-request ), or extend monitoring
3343