Dell PowerConnect J-EX4200-24T Software Manual page 3309

Table 434: show ted database Output Fields (continued)
Field Name Field Description
Interface Switching Information about the interface switching capability descriptor, which is a
subtype length value (TLV) of the link TLV.
Capability
Descriptor (n)
Switching type
PSC-1
PSC-2
PSC-3
PSC-4
L2SC
TDM
LSC
FSC
Encoding type
Packet
Ethernet
ANSI/ETSI PDH
Reserved
SDH /SONET
Digital Wrapper
Lambda (photonic)
Fiber
FiberSDH/SONET
Maximum LSP BW [priority] bps
Amount of bandwidth actually reserved for each priority level. The bandwidth
shown is for the entire interface.
[n]
n Mbps
Minimum LSP BW
actually reserved for each priority level. The bandwidth shown is for the entire
interface.
TDM
Interface MTU
Interface supports standard SONET/SDH
is TDM
show ted database show ted database
brief brief
—Type of switching to be performed on a particular link:
—Packet switch-capable 1
—Packet switch-capable 2
—Packet switch-capable 3
—Packet switch-capable 4
—Layer-2-switch-capable
—Time-division-multiplexing-capable
—Lambda switch-capable
—Fiber switch-capable
—Encoding of the LSP being requested:
—Maximum LSP bandwidth information.
—Priority level. The range is from
—Amount of the maximum bandwidth.
—Minimum LSP bandwidth in Mbps. Amount of bandwidth
is displayed only when
Minimum LSP BW
.
—Displayed only when
.
user@host> show ted database brief
TED database: 6 ISIS nodes 6 INET nodes
ID
cheviot.00(123.456.1.10)
corriedale.00(123.456.1.11)
wolff.00(123.456.1.12)
perendale.00(123.456.1.13)
merino.00(123.456.1.14)
romney.00(123.456.1.15)
Chapter 125: Operational Mode Commands for MPLS
is the index number.
n
(high) through (low).
0 7
is
switching type
is .
switching type TDM
—Displayed only when
switching type
Type Age(s) LnkIn LnkOut Protocol
Rtr 383 1
Rtr 36 2
Rtr 399 0
Rtr 385 2
Rtr 379 1
Rtr 427 0
Level of Output
extensive
or
PSC-1
1 IS-IS(2) IS-IS(1)
0 IS-IS(2) IS-IS(1)
0 IS-IS(2) IS-IS(1)
0 IS-IS(2) IS-IS(1)
3 IS-IS(2) IS-IS(1)
2 IS-IS(2) IS-IS(1)
3237