Dell PowerConnect J-EX4200-24T Software Manual page 3289

J series; j-ex series
Table of Contents

Advertisement

Related
Documentation
List of Sample Output
Output Fields
Table 430: show rsvp session Output Fields
Field Name
Field Description
Ingress RSVP
Information about ingress RSVP sessions.
Ingress RSVP
Information about ingress RSVP sessions. Each session has one line of output.
Information about egress RSVP sessions.
Egress RSVP
Information about the transit RSVP sessions.
Transit RSVP
Destination (egress switch) of the session.
To
Source (ingress switch) of the session.
From
State of the path:
State
being taken down gracefully.
Destination (egress switch) of the LSP.
Address
State of the LSP that is being handled by this RSVP session. It can be either
LSPstate
(down), or
Dn
gracefully.
Rt
Number of active routes (prefixes) that have been installed in the routing table.
For ingress RSVP sessions, the routing table is the primary IPv4 table (
For transit and egress RSVP sessions, the routing table is the primary MPLS table
mpls.0
Number of active routes (prefixes) that have been installed in the forwarding
ActiveRoute
table. For ingress RSVP sessions, the forwarding table is the primary IPv4 table
(
inet.0
MPLS table (
Name of the LSP.
LSPname
Example: Configuring MPLS on J-EX Series Switches on page 3071
Configuring MPLS on Provider Edge Switches (CLI Procedure)
Configuring MPLS on Provider Switches (CLI Procedure) on page 3102
Junos OS MPLS Applications Configuration Guide at
http://www.juniper.net/techpubs/software/junos/
show rsvp session on page 3218
show rsvp session statistics on page 3219
show rsvp session detail on page 3219
show rsvp session extensive on page 3219
Table 430 on page 3217 describes the output fields for the
Output fields are listed in the approximate order in which they appear.
,
, or
Up
Down
AdminDn
.
indicates that the LSP is being taken down
AdminDn
AdminDn
).
). For transit and egress RSVP sessions, the forwarding table is the primary
).
mpls.0
Chapter 125: Operational Mode Commands for MPLS
.
indicates that the LSP is
AdminDn
command.
show rsvp session
Level of Output
detail
All levels
All levels
All levels
All levels
All levels
All levels
detail
,
Up
brief, detail
brief
inet.0
).
detail
brief, detail
3217

Advertisement

Table of Contents
loading

Table of Contents