Alcatel-Lucent 7710 SR Configuration Manual page 53

hop hop — Specify the maximum number of hops that will be traced from the receiver back toward
router-instance — Specify the router name or service ID.
wait-time wait-time — Specify the number of seconds to wait for the response.
password
Syntax password
Context <ROOT>
Description This command changes a user CLI login password.
When a user logs in after the administrator forces a new-password-at-login, or the password has
expired (aging), then this command is automatically invoked.
When invoked, the user is prompted to enter the old password, the new password, and then the new
password again to verify the correct input.
If a user fails to create a new password after the administrator forces a new-password-at-login or
after the password has expired, the user is not allowed access to the CLI.
ping
Syntax ping {ip-address | ipv6-address | dns-name} [rapid | detail] [ttl time-to-live] [tos type-of-
service] [size bytes] [pattern pattern] [source ip-address] [interval seconds] [{next-hop ip-
address} | {interface interface-name} | bypass-routing] [count requests] [do-not-
fragment] [router [router-instance] [timeout timeout]
Context <GLOBAL>
Description
The TCP/IP utility to verify IP reachability.
Parameters
ip-address | dns-name — The remote host to ping. The IP address or the DNS name (if DNS name
ipv6-address — The IPv6 IP address.
7710 SR OS Basic System Configuration Guide
the source.
Values
1 — 255
Default
32 hops (infinity for the DVMRP routing protocol).
Values router-name:
service-id:
Default Base
Values
1 — 60
resolution is configured) can be specified.
Values
x:x:x:x:x:x:x:x (eight 16-bit pieces)
x:x:x:x:x:x:d.d.d.d
x: 0 — FFFF H
d: 0 — 255 D
Base , management
1 — 2147483647
Basic CLI Commands
Page 53