Table of Contents
Advertisement
Show Commands
connections
Syntax
connections [address ip-address [interface interface-name]] [port port-number] [detail]
Context
show>system
Description
This command displays UDP and TCP connection information.
If no command line options are specified, a summary of the TCP and UDP connections displays.
Parameters
ip-address — Displays only the connection information for the specified IP address.
port-number — Displays only the connection information for the specified port number.
detail — Appends TCP statistics to the display output.
Output
Standard Connection Output — The following table describes the system connections output
fields.
Sample Output
A:ALA-12# show system connections
===============================================================================
7710 SR OS Basic System Configuration Guide
Values
ipv4-address:
ipv6-address:
Values
0 — 65535
Label
Proto
RecvQ
TxmtQ
Local Address
Remote Address
State
a.b.c.d (host bits must be 0)
x:x:x:x:x:x:x:x[-interface]
x:x:x:x:x:x:d.d.d.d[-interface]
x:
[0 — FFFF]H
d:
[0 — 255]D
interface: 32 characters maximum, mandatory for link local
addresses.
Displays the socket protocol, either TCP or UDP.
Displays the number of input packets received by the protocol.
the
Displays
number of output packets sent by the application.
Displays the local address of the socket. The socket port is separated
by a period.
Displays the remote address of the socket. The socket port is separated
by a period.
Listen — The protocol state is in the listen mode.
Established — The protocol state is established.
System Management
Description
Page 355
Advertisement
Table of Contents
