Time Range Commands - Alcatel-Lucent 7710 SR Configuration Manual

Time Range Commands

time-range
Syntax [no] time-range name
Context config>cron
Description
This command configures a time range.
The no form of the command removes the name from the configuration.
Default
none
Parameters name — Configures a name for the time range up to 32 characters in length.
absolute
Syntax absolute start start-absolute-time end end-absolute-time
no absolute start absolute-time
Context config>cron>time-range
Description
This command configures an absolute time interval that will not repeat.
The no form of the command removes the absolute time range from the configuration.
Parameters start absolute-time — Specifies starting parameters for the absolute time-range.
end absolute-time — Specifies end parameters for the absolute time-range.
7710 SR OS Basic System Configuration Guide
Values
absolute-time:
year:
month:
day:
hh:
mm: [
Values absolute-time:
year:
month:
day:
hh:
mm: [
year/month/day,hh:mm
2005 — 2099
1 — 12
1 — 31
0 — 23
0 — 59
year/month/day,hh:mm
2005 — 2099
1 — 12
1 — 31
0 — 23
0 — 59
System Management
Page 317