Alcatel-Lucent 7710 SR Configuration Manual page 318

System Command Reference
daily
Syntax daily start start-time-of-day end end-time-of-day
no daily start start-time-of-day
Context config>cron>time-range
Description This command configures the start and end of a schedule for every day of the week. To configure a
daily time-range across midnight, use a combination of two entries. An entry that starts at hour zero
will take over from an entry that ends at hour 24.
The no form of the command removes the daily time parameters from the configuration.
Parameters
start-time-of-day — Specifies the starting time for the time range.
end-time-of-day — Specifies the ending time for the time range.
weekdays
Syntax weekdays start start-time-of-day end end-time-of-day
no weekdays start start-time-of-day
Context config>cron>time-range
Description
This command configures the start and end of a weekday schedule.
The no form of the command removes the weekday parameters from the configuration.
Parameters
start-time-of-day — Specifies the starting time for the time range.
end-time-of-day — Specifies the ending time for the time range.
Page 318
Values
Syntax:
Values
Syntax:
Values
Syntax:
Values
Syntax:
7710 SR OS Basic System Configuration Guide
hh:mm
hh 0 — 23
mm 0 — 59
hh:mm
hh 0 — 24
mm 0 — 59
hh:mm
hh 0 — 23
mm 0 — 59
hh:mm
hh 0 — 24
mm 0 — 59