Table of Contents
Advertisement
Navigating in the CLI
The following sections describe additional navigational and syntax information.
•
•
•
•
•
CLI Contexts
Use the CLI to access, configure, and manage Alcatel-Lucent's SR-Series routers. CLI commands
are entered at the command line prompt. Access to specific CLI commands is controlled by the
permissions set by your system administrator. Entering a CLI command makes navigation possible
from one command context (or level) to another. When you initially enter a CLI session, you are in
the ROOT context. Navigate to another level by entering the name of successively lower contexts.
For example, enter either the
the
config
The active CFM slot displays in the command prompt.
In a given CLI context, you can enter commands at that context level by simply entering the text. It
is also possible to include a command in a lower context as long as the command is formatted in
the proper command and parameter syntax.
The following example shows two methods to navigate to a service SDP ingress level:
Method 1:
Method 2:
The CLI returns an error message when the syntax is incorrect.
7710 SR OS Basic System Configuration Guide
CLI Contexts on page 19
Basic CLI Commands on page 20
CLI Environment Commands on page 23
CLI Monitor Commands on page 24
Entering Numerical Ranges on page 34
configure
or
context, respectively. For example, at the command prompt, enter
show
A:ALA-12# config
A:ALA-12>config#
A:ALA-12# configure service epipe 6 spoke-sdp 2:6 ingress
*A:ALA-12>config>service>epipe>spoke-sdp>ingress#
A:ALA-12>config# service
A:ALA-12>config>service# epipe 6
*A:ALA-12>config>service>epipe# spoke-sdp 2:6
*A:ALA-12>config>service>epipe>spoke-sdp# ingress
*A:ALA-12>config>service>epipe>spoke-sdp>ingress#
*A:ALA-12>config# rooter
Error: Bad command.
or
commands at the ROOT context to navigate to
show
CLI Usage
.
config
Page 19
Advertisement
Table of Contents
