Alcatel-Lucent 7710 SR Configuration Manual page 350

System Command Reference
interface
Syntax interface ip-int-name
no interface
Context config>redundancy>mc>peer>mcr>ring>in-band-control-path
Description This command specifies the name of the IP interface used for the inband control connection.If the
name is not configured, the ring cannot become operational.
service-id
Syntax service-id service-id
no service-id
Context config>redundancy>mc>peer>mcr>ring>ibc
Description This command specifies the service ID if the interface used for the inband control connection belongs
to a VPRN service. If not specified, the service-id is zero and the interface must belong to the Base
router.
The no form of the command removes the service-id from the IBC configuration.
Parameters
service-id — Specifies the service ID if the interface.
path-b
Syntax [no] path-b
Context config>redundancy>mc>peer>mcr>ring
Description This command specifies the set of upper-VLAN IDs associated with the SAPs that belong to path B
with respect to load-sharing. All other SAPs belong to path A.
Default
If not specified, the default is an empty set.
range
Syntax [no] range vlan-range
Context config>redundancy>mc>peer>mcr>ring>path-b
config>redundancy>mc>peer>mcr>ring>path-excl
Description This command configures a MCR b-path VLAN range.
Parameters
vla-range — Specifies the VLAN range.
Page 350
Values
[1..4094] - [1..4094]
7710 SR OS Basic System Configuration Guide