Alcatel-Lucent 7710 SR Configuration Manual page 408

Debug Commands
Debug Commands
sync-if-timing
Syntax sync-if-timing
Context debug
Description
The context to debug synchronous interface timing references.
force-reference
Syntax force-reference {ref1 | ref2}
no force-reference
Context debug>sync-if-timing
Description
This command allows an operator to force the system synchronous timing output to use a specific ref-
erence.
NOTE: This command should be used for testing and debugging purposes only. Once the system
timing reference input has been forced, it will not revert back to another reference at anytime. The
state of this command is not persistent between system boots.
When the debug force-reference command is executed, the current system synchronous timing out-
put is immediately referenced from the specified reference input. If the specified input is not avail-
able (shutdown), or in a disqualified state, the timing output will enter the holdover state based on the
previous input reference.
Parameters
ref1 — The clock will use the first timing reference.
ref2 — The clock will use the second timing reference.
system
Syntax [no] system
Context debug
Description This command displays system debug information.
http-connections
Syntax http-connections [host-ip-address/mask]
http-connections
Context debug>system
Page 408 7710 SR OS Basic System Configuration Guide