Table of Contents
Advertisement
bundle-id — Specifies the multilink bundle to be associated with this IP interface. The bundle key-
qtag1, qtag2 — Specifies the encapsulation value used to identify the SAP on the port or sub-port. If
Port Type
Encap-Type
Ethernet
Null
Ethernet
Dot1q
Ethernet
QinQ
SONET/SDH
IPCP
SONET/SDH
BCP-Null
SONET/SDH
BCP-Dot1q
interval seconds — Configures the interval for each display in seconds.
repeat repeat — Configures how many times the command is repeated.
absolute — When the absolute keyword is specified, the absolute rate-per-second value for each
rate — When the rate keyword is specified, the rate-per-second for each statistic is displayed instead
7710 SR OS Basic System Configuration Guide
word must be entered at the beginning of the parameter.
The command syntax must be configured as follows:
bundle-id:
bundle-type-slot-id/mda-slot.bundle-num
bundle-id value range: 1 — 128
For example:
*A:ALA-12>config#
*A:ALA-12>config>port# multilink-bundle
this parameter is not specificially defined, the default value is 0.
Values
qtag1:
qtag2 :
The values depends on the encapsulation type configured for the interface. The following table
describes the allowed values for the port and encapsulation types.
Allowed Values
0
0 — 4094
qtag1: 0 — 4094
qtag2: 0 — 4094
-
0
0 — 4094
Default
11 seconds
Values
11 — 60
Default
10
Values
1 — 999
statistic is displayed.
of the delta.
port bundle-ppp-1/1.1
0 — 4094
* | 0 — 4094
The SAP is identified by the port.
The SAP is identified by the 802.1Q tag on the port.
Note that a 0 qtag1 value also accepts untagged packets
on the dot1q port.
The SAP is identified by two 802.1Q tags on the port.
Note that a 0 qtag1 value also accepts untagged packets
on the dot1q port.
The SAP is identified by the channel. No BCP is
deployed and all traffic is IP.
The SAP is identified with a single service on the
channel. Tags are assumed to be part of the customer
packet and not a service delimiter.
The SAP is identified by the 802.1Q tag on the channel.
Basic CLI Commands
Comments
Page 97
Advertisement
Table of Contents
