Table of Contents
Advertisement
Modifying and Saving a Configuration
If you modify a configuration file, the changes remain in effect only during the current power
cycle unless a
router is rebooted without saving.
•
•
•
Use either of the following CLI syntax to save a configuration:
CLI Syntax: bof# save [cflash-id]
Example
or
CLI Syntax: admin# save [file-url] [detail] [index]
Example
NOTE: If the
executed with an FTP path used as the
open to the FTP server. The FTP server must be configured to allow multiple sessions from the
same login, otherwise, the configuration and index files will not be saved correctly.
7710 SR OS Basic System Configuration Guide
command is executed. Changes are lost if the system is powered down or the
save
Specify the file URL location to save the running configuration. If a destination is not
specified, the files are saved to the location where the files were found for that boot
sequence. The same configuration can be saved with different file names to the same
location or to different locations.
The
option adds the default parameters to the saved configuration.
detail
The
option forces a save of the index file.
index
:
A:
ALA-1# bof
A:
ALA-1>bof# save cf3:
A:
ALA-1>bof#
:
A:
ALA-1# admin save cf3:\test123.cfg
Saving config.# Saved to cf3:\test123.cfg
... complete
A:
ALA-1#
option is enabled and the
persist
admin save file-url
parameter, two FTP sessions simultaneously
file-url
Boot Option Files
command is
Page 147
Advertisement
Table of Contents
